Onefinity Rail Endcaps (digital files)
Full set of digital STL files to print end caps for all rail openings on a Onefinity CNC machine, to prevent dust buildup in the open ends of the X & Y rails. All end caps are designed to be friction fit, and removable.
Includes:
- Three models for the full-cap ends of the rails (Two logo, one blank)
- Two models for the stepper-cap on the rails that are just above the axis stepper motors
- Two models for the ball-cap - a flush-mount end cap for the ball-screw rails, one of which has a small hole in the center for removal; note: if printing the ball-cap without a hole, this piece will not be easily removable.
A full set will need five full-caps, three stepper-caps, and 2-3 ball-caps (if you have *not* mounted the touch screen per-instructions, you will need an one more ball-cap)
Print settings:
- Material: PLA (or PETG)
- Infill: 20%
- Bottom Pattern Initial Layer: Concentric (if your machine supports it)
Full set of digital STL files to print end caps for all rail openings on a Onefinity CNC machine, to prevent dust buildup in the open ends of the X & Y rails. All end caps are designed to be friction fit, and removable.
Includes:
- Three models for the full-cap ends of the rails (Two logo, one blank)
- Two models for the stepper-cap on the rails that are just above the axis stepper motors
- Two models for the ball-cap - a flush-mount end cap for the ball-screw rails, one of which has a small hole in the center for removal; note: if printing the ball-cap without a hole, this piece will not be easily removable.
A full set will need five full-caps, three stepper-caps, and 2-3 ball-caps (if you have *not* mounted the touch screen per-instructions, you will need an one more ball-cap)
Print settings:
- Material: PLA (or PETG)
- Infill: 20%
- Bottom Pattern Initial Layer: Concentric (if your machine supports it)
Full set of digital STL files to print end caps for all rail openings on a Onefinity CNC machine, to prevent dust buildup in the open ends of the X & Y rails. All end caps are designed to be friction fit, and removable.
Includes:
- Three models for the full-cap ends of the rails (Two logo, one blank)
- Two models for the stepper-cap on the rails that are just above the axis stepper motors
- Two models for the ball-cap - a flush-mount end cap for the ball-screw rails, one of which has a small hole in the center for removal; note: if printing the ball-cap without a hole, this piece will not be easily removable.
A full set will need five full-caps, three stepper-caps, and 2-3 ball-caps (if you have *not* mounted the touch screen per-instructions, you will need an one more ball-cap)
Print settings:
- Material: PLA (or PETG)
- Infill: 20%
- Bottom Pattern Initial Layer: Concentric (if your machine supports it)
Digital file included in this listing is licensed under Creative Commons 4.0 CC-BY-NC-SA by Sylvester Works LLC.
This license requires that re-users give credit to the creator. It allows re-users to distribute, remix, adapt, and build upon the material in any medium or format, for noncommercial purposes only. If others modify or adapt the material, they must license the modified material under identical terms. For more information on this license, please see the Creative Commons BY-NC-SA License.
